My Store
223 5.56mm Red Laser Bore Sight Brass Cartridge Bullet Shap Boresighter 6Battery
223 5.56mm Red Laser Bore Sight Brass Cartridge Bullet Shap Boresighter 6Battery
Couldn't load pickup availability
About this item
- Bore sighting laser Class IIIA, less than 5mW
- Solid brass case and cartridge shape design for the bore sights, perfectly fit for the the .223/5.56mm chamber, caliber specific
- Accurate laser centered and accurately leveled from the factory, laser is properly centered in the shell to make sure your sights are accurate, save your time and ammo at the range
- Allow sighting continuously 30 minutes with one set of batteries, there’s 2 sets batteries included in the metal box, please remove the batteries after calibration
Product Description
Bore Sight Red Laser Easy Adjust and Zeroing Optics Bore Sighter with 2 Sets Batteries for Scope Sighting
Specification:
Red laser Class IIIA
Power less than 5mW
Material: Solid Brass
Dimension:44.5mm*9.5mm*6.3mm
Dot Size: 1" at 50 yds
Laser wavelength: 632-650nm
Sighting range 15-100 yards
Temperature: -10℃ to 40℃
Packing box included: Bore sighter + 6 batteries(2 sets)
How to use the laser boresighter?
STEP 1: Make sure your firearm is unloaded, remove magazine and double check that chamber is empty
STEP
2: Unscrew the back cap from the bore sighter and insert 3 batteries(+
side up) inside the rear opening,there is no switch on the boresighter,
so the laser will be on after tighten the cap
STEP 3: Place in your
equipment's chamber and close the bolt then you can start sighting your
scope and laser sights. Our boresighter has been centered and accurately
leveled from the factory
STEP 4:After finish the caliberation, Open
the bolt if it does not automatically extract, manually remove the unit
by tilting the equipment's barrel upward
STEP 5:Take out the battery from boresighter and keep them in the packing box for using next time
Note:
Please remove the batteries after calibration
Please do not point the laser to people's eyes directly
Share





