My Store
Fuel Pump Assembly For 2008+ Polaris Ranger 500/700/800 EFI 2204306 2520817
Fuel Pump Assembly For 2008+ Polaris Ranger 500/700/800 EFI 2204306 2520817
Couldn't load pickup availability
About this item
- Fitment - Electric intank fuel pump assembly with fuel level sending unit fit for 2009-2011 Ranger 500 EFI, Fits for 2012-2013 Ranger 500 4x4 / CREW, Fits for 2013 Ranger 500 CREW / CREW Midsize, Fits for 2008-2009 Ranger 700 4x4 EFI / CREW, Fits for 2008 Ranger 700 4x4 EFI XP, Fits for 2009 Ranger 700 6x6 EFI, Fits for 2010 Ranger 800 4x4 EFI / CREW / 6
- Replace Part #: 2204306 2520817
- Function - Fuel pump with fuel level sending unit better solve the problem of fuel pump failure, designed and constructed for problem free operation in excess of 100,000 miles or 30,000 hours
- Installation - Fuel pressure regulator same performance as your original pump.No wiring or modification is required. When checking your fuel pressure be sure to rev your engine and put it under a load if you can safely, intank fuel pump kit meets or exceeds oem standards
Installation Precautions
When installing, wear necessary protective tools and choose a well-ventilated place to avoid sparks or open flames.
- This is a replacement fuel pump for polaris rangers with EFI.
- Our pump installs just Same performance as your original pump.
- Requires you to purchase a new fuel tank to replace the fuel pump.
- This pump is more reliable than the stock one that commonly fails under normal loads.
2204306 2520817 Fuel Pump Assembly
Applications:
Fits for 2009-2011 Ranger 500 EFI
Fits for 2012-2013 Ranger 500 4x4 / CREW
Fits for 2013 Ranger 500 CREW / CREW Midsize
Fits for 2008-2009 Ranger 700 4x4 EFI / CREW
Fitsfor 2008 Ranger 700 4x4 EFI XP
Fits for 2009 Ranger 700 6x6 EFI
Fits for 2010 Ranger 800 4x4 EFI / CREW / 6
Replace Part #:
2204306, 2520817
- Please check the pictures and specifications for details before your buy.
- Please check as much as possible to make sure the item is the one that you need.
When checking your fuel pressure be sure to rev your engine and put it under a load if you can safely.
|
|
|
|
|---|---|---|---|
Installation Precautions
To avoid premature damage to the new pump, the contaminants in the fuel tank should be removed before installation and a new filter should be replaced. In order to avoid fire, when removing and installing the fuel pump, the negative wire of the battery should be disconnected first. The fuel pump should be handled with care during transportation and installation, and the fuel pump that has fallen should not be used. It is strictly forbidden to operate the electric fuel pump without oil.
1. Preparation work
Before proceeding with all removal and installation work, disconnect the power supply for more than 90 seconds. Relieve the pressure of the fuel system. Remove the top cover of the fuel tank filter to relieve the pressure of the fuel system. Remove and keep the battery negative lead disconnected.
2.Disassemble the fuel pump assy
(1) Thoroughly clean the area around the fuel pump assembly device to avoid fuel contamination.
(2) Remove the fasteners that fasten the fuel pump device in the fuel tank, and remove the fuel pump assembly. Be careful not to contaminate the fuel tank or leave items in the fuel tank.
(3) The disassembled assembly cannot be placed randomly, it must be placed on clean paper or in a professional container.
(4) When handling the fuel pump assembly, be especially careful not to bend or damage the float and resistor. Bending or damaging these items will cause inaccurate fuel tank fuel readings.
3. Replace the fuel pump assembly
Check for oil leaks. After confirming that the circuit, oil circuit, fasteners, and accessories are restored to their original state, power on and test run.
Reconnect the battery negative cable. Insert the ignition key, turn the switch to ON (don't start the engine!) and wait for 10 seconds.
Check whether the fuel is leaking. If a leak is detected, turn off the ignition switch immediately.
If no leak is detected, start the engine, and the full engine start may continue until the air in the fuel tank is cleared. Complete the replacement of the fuel pump assembly.
